Skip to content
Install the power supply and air pipe:
Standard fittings:
- Tungsten steel / Ceramic heater
- Power cord
- Trachea
- Glass washing platform
- Hex wrench
- Teflon
- welding head
- Positioning piece
- Silicon rubber strip
2. Then install the filter, unscrew the two screws on the left side of the machine with a Screwdriver and install the filter. Connect the air pipe next to the machine to the air outlet of the filter; connect the end of the 8 air pipe without a quick connector to the air inlet of the filter, and the other interface to the air compressor.
3. Turn on the switch of the air compressor, push the steam source switch next to the filter to the right, and observe the pressure value of the filter. If the numerical pressure is incorrect, you can adjust it to the desired value by adjusting the pressure regulating valve.
Introduction to button functions:
First, turn on the power switch and wait for the touch screen and display to start.LCD: an image system used for alignment.
Touch screen: set the overall control and parameter settings of the equipment.
Temperature controller: control the temperature of the pressure head.
Heating switch: control the heating of the pressure head.
Pressure speed display: pressure control of pressure head drop.
Pressure regulating valve: pressure regulation control of the pressure head.
Lighting: used for background light illumination.
Red light indicator button: used to determine the position of the pressure head.
Pressure head up/down: used to control the up and down adjustment of the pressure head.
Bottom light button: used to adjust the brightness of the bottom light in bottom light manual mode.
Introduction of video splitter:
The buttons are mainly used to switch the upper and lower lenses of the video and to zoom in and out the image.Introduction to smart touch screen:
This chapter mainly introduces how to set the parameters on the touch screen and the meaning of the parameters.Camera and image adjustment:
Take the oled COF screen as an example, place it on the LCD platform, observe the image on the display and adjust it.Bonding demonstration:
Take Bonding iPhone 11 Backlight Screen as an example.Machine introduction:
After all the introductions above, the following video is an introduction to the whole process of using the EN-580 bonding machine. The EN-580 bonding machine is designed for precision bonding of iPhone Flex Cables. The machine ensures a constant temperature during the bonding process, which is critical to achieving a strong, reliable bond.Step-by-step instructions for use:
Preparation: Make sure the machine is properly set up and connected to a power source.Setting the temperature: Adjust the machine to the constant temperature required for your specific bonding task. This is critical to ensure the Adhesive activates and bonds the materials properly.
Positioning the materials: Place the flex cables and other materials to be bonded in the proper position on the machine. Make sure they are properly aligned to avoid misalignment during the bonding process.
Starting the bonding process: Start the machine and monitor the bonding process. The EN-580 will apply heat and pressure as needed to bond the materials together.
Cooling: After the bonding process is complete, allow the materials to cool before handling to ensure a strong bond.
Inspection: Inspect the bonded materials for any defects or misalignment. Repeat the process if necessary to achieve the desired quality.
Safety precautions:
Heat safety: Always use caution when working with high temperatures. Use appropriate personal protective equipment (PPE), such as heat-resistant gloves.Electrical safety: Make sure all electrical connections are secure and there are no exposed wires to prevent electrical hazards.
Proper ventilation: Use the machine in a well-ventilated area and avoid inhaling any fumes that may be released during the bonding process.
Regular maintenance: Maintain and clean the machine regularly to ensure it operates efficiently and safely.
This article is here. If you want to know more about the functions of the EN-580 Bonding Machine or other similar equipment, you can enter Phonefix to view and consult. China Phonefix provides you with professional iPhone repair tools.
