DS211 is an update style of DSO201, a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements. It is equipped with 320*240 color display, Weighs only 65g! Portable Digital Oscilloscope DIY Kit provides waveform viewing.
Product Specification :
- MCU: STM32F103VC
- ADC: MCU internal ADC
- Number of channels: 1 Analog channel + 1 internal channel
- Analog bandwidth: 200KHz
- The maximum sampling rate: 1MSa/s
- Maximum storage depth: 8K
- Horizontal scanning speed: 1uS / Div ~ 2S / Div (1-2-5 step)
- Vertical Sensitivity: 20mv / Div ~ 10V / Div (1-2-5 step)
- Input impedance: 1MΩ
- Coupling: DC / AC
- Trigger mode: Rising / falling edge trigger
- Auto adjustment mode: AUTO_FIT
- Operation waveform: -A, RecA, A + RecA
- Signal output: Square wave, sine wave, triangular wave, sawtooth wave
- Trigger mode: Auto, Normal, Single, None, Scan
- Measured values: Signal frequency / period / duty cycle, Voltage peak-to-peak value / effective value / maximum value / minimum value / average value
- Storage: 8MB built-in USB flash disk
- Can be installed 1 PC APP
- Operation: Press the key
- USB interface: Micro USB
- Battery: 550mAh
- Screen size: about 2.8 inches
- Screen resolution: 320*240
- Size: about 106.5*55.7*11.5 mm/ 41.93*21.93*4.53 in
- Weight (with battery): about 65g
- Open source: application layer open source
- Certification: CE / FCC
Usage :
- Based on STM32 do open source products. Oscilloscope and a multimeter.
- The good helper in measurement and maintenance work.
- Can be used as a good tool for STM32 series MCU programming.
Packing List :
- 1 * DS211 host
- 1 * DS211 dedicated MCX probe
- 1 * 800mah built-in lithium battery
- 1 * Mini USB cable
- 1 * Manual
- 1 * Cloth velvet protective bag
Skip to content