16 Kind Colors Shows + Colorful Touch Control: iPhone LED Logo Light Flex Cable For iPhone 6 6P 6S 6SP 7 7P
It is used for replacing the flex cable on the rear parts of your iPhone. The iPhone light logo is designed for 16 kind colors shows including white, red, green, blue, sky blue, purple, orange..., The cool glow lamp logo are tested and confirmed in good condition, which will make your iPhone look more attractive and beautiful.
Note: Don't try if you have no technical skills, it will require disassembling or assembling cell phones.
- Turn off the machine and unscrew the bottom of the plum.
- Use a sucker to suck the screen and slowly open it.
- Use tools to pry open the screen slowly.
- Disassemble the battery (the two circle of my circle on the battery should be two rectangular 3M sticky glue, buckle down, then pull out from both sides of the battery, do not dismantle the battery violent. ) remove the two screws.
- Dismantling the original Logo.
- Does not explain too much about setting the lamp in alignment.
- There is a piece of insulating adhesive in the area where the 1 circles come out. Then the lamp is inserted at the position. The superfluous lines can be placed in the space of graph 2.
- Put on insulating adhesive tape and sponge. The adhesive tape is placed sideways, and the sponge is vertically attached.
- Put the bottom line in this space. A vacancy next to the tail plug assembly.
- How to install the battery and install it back. A small piece of double-sided adhesive can be attached to the battery to prevent the battery from loosening inside.
- 1pcs x LED Back Logo Light Flex Cable ( LED back Logo replacement only, iPhone not included. )