HAKKO FX-888D Digital ESD Soldering Station 70W Adjustable Temperature
Option Hardware design :
- Original HAKKO FX-888D
- OEM FX-888D, From China Factory
Optional voltage : 220V or 110V
Note: 110V, need customized, time: about 1-2 daysDescription :
- 70W mains powered soldering iron that allows you to get soldering by simply plugging the iron in
- Heats up in 23 seconds to allow you to begin soldering almost right away
- Selectable temperature from 50°C to 480°C, ensuring that your solder can be melted without excessive heat damaging the components you are soldering
- Mains powered to give you the freedom to solder for as long as you like
- LED display to allowing you to set and monitor the temperature of your soldering iron
- ESD Safe:The adjustment and presentable modes ensure you can set the temperature to what you desire and then you can lock it with a password to protect your settings.
- Simply unpack this soldering iron and connect it to a mains socket. In under a minute, it should have warmed up to temperature and be ready for use.
The wattage of a soldering iron is one of the most important factors when deciding which one to buy. Higher wattage will deliver more heat to the iron’s tip, allowing it to heat up quicker. As this is a 70W mains solder station, it heats up the tip in under 20 seconds to a selected temperature, allowing you to start soldering without having to refill butane tanks or replace batteries.
Specification :
- Lead free soldering
- Soldering for PTH/SMT component
- Model: FX-888D
- Main body color: Blue & yellow
- Power Consumption: 70W
- Temperature range: 200 to 480 ℃
- Temperature stability: +/- 1℃
- Temperature setting lock type: Dial screw type
- Station Voltage: 26V
- Dimensions: 95(W) x 118(H) x 136(D) mm
- Weight (w/o cord): Approx. 1.3 kg
- Iron Power Consumption: 65W (26V)
- Resistance between tip and ground: < 2 ohm
- Tip to ground potential: < 2mV
- Cord: 1.2 m
- Total length (w/o cord): 190 mm
- Weight (w/o cord): 44 g
- Iron Holder: Blue & Yellow
