iFixes iJ2 Multi-purpose Dual Preheating Holding Pressure Machine for iPhone screen bracket frame hot pressing, mobile phone back cover pressing, airtightness restoration, and pressing of mobile phones, including straight/curved/folding screen mobile phones.
Feature:
1. iFixes iJ2 multifunctional double preheating and holding pressure machine, used for air tightness restoration, back cover hot pressing, support screen frame hot pressing, whole machine hot pressing, upper and lower heating temperatures are adjustable.
2. Double preheating, up and down temperature, heating at the same time, speed up the pressure holding efficiency, four temperatures preset solid temperature.
3. Exquisite technology, heating up and down, simple operation.
4. Fine metal manufacturing lengthened press handle for easier pressure retention.
5. The fixing ring is automatically locked when the mold is pressed down, Pull the fixing ring and gently lift the handle.
6. Metal material, stable does not run, silicone pad does not hurt the screen, fast and convenient.
7. Super compatibility, suitable for a wide range of cell phone screens and other pressure-sensitive repairs.
8. Anti-wear sponge pad, tight fit, mobile phone pressure screen, more uniform force.
Please note:
1. iPhone holder hot pressing requires the purchase of a dedicated mold separately.
2. Restoring the airtightness of the iPhone requires the purchase of dedicated molds separately.
3. For sticking glue using iFixes iF28 original process glue seal or stick the bracket, complete just use the built-in mat after gluing, put it into ij2 hot pressing machine to maintain stability, press for about 5-10 minutes, it can be completely cured.
Reference data for temperature setting and pressure holding time.
1. Airtightness restoration.
Upper layer heats: 100℃.
Lower layer heats: below 80℃.
Pressure holding time: 3-5minutes.
Note: Special molds are required.
2. AB glue for Bracket.
Upper layer heats: 100℃.
Lower layer heats: 60-80℃.
Pressure holding time: 3-5 minutes.
Note: Special molds are required.
3. Back cover glass.
Upper layer heats: 100℃.
Lower layer heats: 80℃.
Pressure holding time: 5-8minutes.
Just use the built-in mat.
4. Whole phone hot pressing.
Upper layer heats: 100℃.
Lower layer heats: below 80℃.
Pressure holding time: 5-10minutes.
Just use the built-in mat.
