|
Output Power
|
300W
|
|
Output voltage
|
0~30V/60V
|
|
Output current
|
0~10A/5A
|
|
working environment
|
|
|
input voltage：AC 230V/115V±10%；50Hz/60Hz
|
|
Working temperature：0℃～40℃;relative humidity:<80%RH
|
|
Storage temperature：-10℃～70℃;relative humidity:<70%RH
|
|
Constant voltage CV
|
|
|
Voltage stability：0.1%±3mV
|
|
Load stability： 0.2%±3mV
|
|
Ripple voltage：≤0.5% Vp-p
|
|
0 to rated voltage continuously adjustable
|
|
constant current CC
|
|
|
Current stability：0.1%±3mA
|
|
Load stability： 0.2%±3mA
|
|
Ripple current：≤0.5% Vp-p
|
|
Recovery time：≤500μS
|
|
Temperature coefficient：≤100ppm/℃
|
|
0 to rated current continuously adjustable
|
|
display
|
|
|
LED digit display
|
|
Display accuracy：0.5%±digits
|
|
Display resolution： voltage 0.1V/0.01V， current 0.01A/0.001A
|
Features:
1. Production line test.
2. Mobile phone/ computer/electrical appliance maintenance, Car DVD, car audio.
3. Product aging, electroplating, such as resistors, capacitors, relays, DC motors, LEDs, etc.
4. Charge the battery.
5. Laboratory, scientific research teaching, factory, maintenance power supply. School laboratories scientific research and production line use
6. All other occasions requiring DC power supply.
Packages:
1x DC power supply
1x power cord (EU,US,UK,AU)
1x Test line
1x Instructions
Q: Is it suitable for repairing mobile phones and laptops?
A: Yes.
Q: Does this power supply charge the battery of a 25v car?
A: You can charge a 25V battery, because the maximum voltage of the power supply can reach 30V (note！！the power supply Set up voltage must be greater than the battery voltage before it can charge it, otherwise it will kick back the power supply and damage the power supply!)
Q: Can it be used for electroplating?
A: It can be electroplated.
Q: When does the fan rotate?
A: When the internal temperature of the power supply is greater than 50℃, it will start automatically.
Q: When this power is turned off and on again, does it remember the last setting?
A: It is controlled by the adjustment knob, and as long as you don't move the adjustment knob, it will power on at the previous setting.
Skip to content