Z3X Easy Jtag Plus BOX is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and many more protocols. ICFriend Moorc E-Mate X EMMC 13-in-1 BGA Adapter is designated for direct EMMC memory chips connection with the wide range of supported BGA types. It is compatible with all most known EMMC boxes: Riff, RIFF 2, ATF, Z3X Easy Jtag, Z3X Easy Jtag Plus, Medusa Pro.
Z3X Easy-Jtag Plus - Outstanding features: One click device repair Boot repair Data recovery eMMC firmware repair Partition management eMMC service operations SPI memory programming
Z3X Easy-Jtag Plus - Hardware features: Updated Host MCU SAM3X8E (comparing to LPC1768 in old box) Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box) Updated power management subsystem – full digital PWM with ADC control Added Micro-USB connector (if additional power required) Added VCC and VCCQ switch with overcurrent protection Updated USB device interface: USB 2.0 480 Mbps (high speed) Integrated ISP engine: Z3X high power pro engine (4 MB/s) ISP support 1 and 4 bit* connection Added eMMC 8-bit high-speed interface up to 42 MHz Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC Integrated M-PHY* interface Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC Integrated self-test core that excludes 90% faults in production Integrated CCID card reader for Z3X Software Use
Z3X Easy-Jtag Plus - Hardware benefits: Box to Host PC speed increased up to 40 MB/sec JTAG Interface speed increased by 20% eMMC 1 Bit ISP Speed increased up to 4 MB/sec eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) ** eMMC 4 Bit Speed up to 18 MB/sec eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+) Compatible with 99% host PC systems and OS Compatible with old Easy JTAG 1st generation ISP adapters (1 bit) Compatible with most of the popular eMMC sockets (with supplied adapters) Plug and Play for Windows OS 8/ 8.1/10 Full support for Windows XP
Z3X Easy-Jtag Plus Lite Set - Package Content: Easy-JTAG Plus Box Hardware Z3X preactivated card with EasyJTAG PLUS Activation USB A-B cable Adapter set - 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
E-Mate X EMMC BGA - Compatible Boxes: Medusa Pro Box Octoplus Pro Box Z3X Easy Jtag Box Z3X Easy Jtag Plus Box UFi Box Riff Riff Box 2 EMMC Pro Tool GPG EMMC Box ATF E-Mate X EMMC BGA - Compatible eMMC: BGA100 BGA136 BGA153 BGA162 BGA168 BGA169 BGA186 BGA211 BGA254 BGA529
