Fix iPhone 12 Camera Popup Issue with JCID Rear Camera Repair Flex Cable
One of the most common problems cell phone technicians face is a iPhone 12 camera the “Important Camera Message (Unknown Part)” popup warning after replacement. In this article, Phonefix will introduce a solution to this problem using the JCID Rear Camera Repair Flex Cable.

The Problem

After replacing an iPhone 12 camera, cell phone technicians often encounter a popup warning that the camera cannot function properly. This is due to the anti-counterfeiting measures implemented by Apple, which only allow original or certified repair cameras to work normally.

This issue can be frustrating for users who have replaced their camera with a third-party option.

The Solution: JCID Rear Camera Repair Flex Cable

The JCID Rear Camera Repair Flex Cable is a tool that can bypass the anti-counterfeiting measures and allow third-party cameras to function normally. To use this tool, follow these steps:
Prepare tools and materials: JC V1S Pro or V1SE programmer, JC iPHONE XR-12PM Wide Camera Repair Module, JCID Rear Camera Repair FPC Cable, (Optional: solder sucker, solder wire, heat gun, multimeter), etc.

    1. Remove the back panel of the iPhone 12 and disconnect the camera.
    2. Disassemble the camera: First, the camera needs to be disassembled to access the cable.
    3. Prepare the new cable: Cut the new cable to the appropriate length and strip the ends of the wires.
Fix iPhone 12 Camera Popup Issue with JCID Rear Camera
  • If the original camera can read encrypted data, write it directly to the JCID camera repair cable;
  • If the original camera is damaged and cannot read encrypted data, scan the code to unbind and then cloud burn;
  • If there is no original camera, jailbreak or disassemble the hard disk to unbind, and then cloud burn!
    4. Reassemble the camera: Put the camera back together and test it to make sure it is working properly.
    Optional step - reinforce the cable: If desired, use a heat gun to apply heat shrink tubing over the repaired cable for added protection.
    5. Finally, reinstall the camera and back panel.

With the JCID Rear Camera Repair Flex Cable, users can rest assured that their third-party camera will function properly without any popup warnings.

FAQ

What is the JCID Rear Camera Repair FPC Cable?

The JCID Rear Camera Repair FPC Cable is a tool that can bypass the anti-counterfeiting measures implemented by Apple, allowing third-party cameras to function properly on the iPhone.

Will the JCID Rear Camera Repair FPC Cable work on other iPhone models?

Support all models above iPhone X, the current repair flex cable supports up to iPhone 12 Pro max, other models will be released soon.

Is it safe to use the JCID Rear Camera Repair FPC Cable?

Yes, the JCID Rear Camera Repair FPC Cable is a safe and reliable solution for fixing the camera popup issue on the iPhone 12.

Do I need any special tools to use the JCID Rear Camera Repair FPC Cable?

Yes, the flex cable needs to be used with iPhone XR-12PM wide-angle camera repair board, and V1S Pro or V1SE Repair Programmer.

How long does it take to install the JCID Rear Camera Repair FPC Cable?

The installation process for the JCID Rear Camera Repair FPC Cable is relatively quick and can be completed in under an hour.

Conclusion

If you're experiencing a camera popup issue after replacing your iPhone 12 camera, the JCID Rear Camera Repair Flex Cable is a reliable solution.

With this tool, cell phone technicians can bypass the anti-counterfeiting measures and use third-party cameras without any issues. Click here to get the JCID Rear Camera Repair FPC Cable now.

Also Read:
iPhone Camera Repair -- Wide-angle Camera Optical Filter Damaged

Iphone 12

Leave a comment

All comments are moderated before being published